High pressure stand alone model

  • ALT-P

    • Aucklat high pressure stand alone model is a new type of solar water heater which adopts advanced heat pipe and all glass vacuum tube Technology.Highly efficient vacuum tube absorbs heat from sunlight and heat pipe transfers heat to the condenser end of itself.Condensor indirectly contacts with water through a copper cap and it boils water by releasing heat gained from vacuum tube. The available size of the tank ranges from 150L to 250L.It has the following features:

    1. High pressure storage tank(Testing pressure=9 bar)
    2. No vent and less heat loss as compared to low pressure model
    3. Highly efficient heat pipe technology
    4. No water introduced into vacuum tube
    5. No sealing rubber is needed and hence no leaking problem
    6. Easy plug-in installation
    7. Anti-freeze

    MODEL

    Absorb Area

    Heat pipe

    Tank capacity

    Qty.per20'/40'
    Container

    (m2)

    diameter

    length

    No.

    (L)

    ALT-P 470-1800/58-18

    1.44

    ¦µ 58mm

    1800mm

    18

    150

    40/82

    ALT-P 470-1800/58-20

    1.60

    ¦µ 58mm

    1800mm

    20

    165

    35/72

    ALT-P 470-1800/58-24

    1.92

    ¦µ 58mm

    1800mm

    24

    200

    30/61

    ALT-P 470-1800/58-30

    2.40

    ¦µ 58mm

    1800mm

    30

    250

    25/50

    NOTEŁşAbsorber area is the part of the collector that actively absorbs the light rays. For solar tubes this is defined as the cross-sectional area of the inner tube (selective coated) measured using the outside diameter. (Eg. 0.047 x 1.72m = 0.08m2)